1. Frets:
On Fibenare guitars we use extrahard nickel silver frets with 18% nickel content in five different sizes (with NO extra charge), where dimensions are the follows:
| fret name | A (mm) | B (mm) |
|---|---|---|
| Jumbo | 2.8 | 1.4 |
| Medium | 2.5 | 1.2 |
| Small | 2.1 | 1.1 |
| Vintage Jumbo | 2.7 | 0.9 |
| Tall & narrow | 2.3 | 1.4 |
Medium frets are available of non-allergic alloy & small frets are available of stainless steel material. These materials are available at extra charge.
2. Neck profiles:
We supply our guitars with three different neck profiles which are available at NO extra charge.
- C-shape: our standard neck profile. Well rounded with no sudden curves in the cross-section.
- V-shape: the oldschool profile of electric guitars, with a bump in the middle of the neck.
- Boat: neck profile rounding is rather on the sides with a little spot in the middle of the neck which is almost flat.
Personal needs can be done on demand.
3. Neck dimensions:
Unlike other makers we offer our neck dimensons independetly of each directions & profiles. This way you can chose the best neck for yourself which plays perfect.
Standard neck widths are the follows:
name |
@ nut (mm) |
@ 24th fret (mm) |
fretboard radius (mm) |
|---|---|---|---|
Regular |
42 |
57 |
270-510 conical |
Wide |
43.5 |
57.7 |
296-520 conical |
Standard neck thicknesses are the follows:
name |
@ 1st fret (mm) |
@ 12th fret (mm) |
|---|---|---|
Regular |
20 |
22 |
Thick |
21 |
23 |
Personal needs can be done on demand!